 |
 |
 |
 |
 |
 |
 |
Sprayable MetalLuminOre® is a patented metal process that seamlessly applies cold composite metal to almost any surface.
It is available in nine metals:
LuminOre® is applied using conventional HVLP (high volume, low-pressure) spray equipment.
LuminOre® gives almost any material the appearance of being a solid cast metal object without the weight. The patented cold-spray, cold-cast process allows a thin layer of metal to be applied over any substrate, in virtually any configuration or design.
LuminOre® looks, feels and acts like hot-cast metal, yet no heat is needed.
It will adhere to almost any surface:
Once cured, the product has all the characteristics of a cast metal, including texture, luster and heat conductivity.
LuminOre® is real metal, so it is durable. It will not crack, chip or peel and is suitable for exterior as well as interior use.
How can a metal be sprayed?
The metal in LuminOre® reacts with the binder. This makes the binder thinner than before the addition of the metal, allowing the material to spray through a 36-thousandths-of-an-inch orifice. The chemical reaction between the metal and the polymer binder turns the finished product into a composite metal. This is not a suspension of metal particles in the polymer system. The metal and binder actually combine to form a true composite metal.
LuminOre® is applied using standard HVLP (high volume, low-pressure) spray equipmen - readily available tools that you may already own - and is finished with standard metal polishing tools. It can be brushed or rolled on to a surface or cast solid. It can be applied on flexible surfaces and does not shrink.
Once you apply or cast LuminOre®, you treat it like solid metal. You may sand, sandblast, polish, wire brush, acid wash, and machine or seal it, even give it a hot patina wash.
Webster & Sons offers a fully accredited two-day training program that allows your company staff to gain the knowledge necessary to begin using this product on your premises. Click here to learn more about this training.
Economical and cost effective.
LuminOre® provides the look, feel and durability of solid cast metal without the expense, weight, inconvenience and time of a forged metal product.
It is most economical at 8 to 10 mils thick (1 mil = .001”). While comprised of up to 95 percent metal, LuminOre® lacks the weight of solid metal.
At its standard 10-mil thickness, LuminOre® adds less than four ounces per square foot to an object. As a result of using LuminOre®, our customers have found that they are able to increase their revenues significantly and without a large investment.
Contact us if you would like to have more specific details.